2HP DC Inverter Compressor Drive

BDR04A is single-phase variable-frequency driver controller, Maximum input current is 12.0A. Rated input voltage is AC220V 50/60Hz. This variable frequency driver is controlled by a position sensorless 180 degree sine wave vector and driven by Control of BLDC Compressor.The Inverter Compressor Drive Board is designed to provide reliable and efficient motor control for variable-speed compressors used in air conditioning, heat pump, and chiller applications.

Multi-protection : an abnormal bus voltage protection ,compessor lack of phase protection ,IPM module temperautre protection ,compressor over current protection ,ect

BLDC fan output : Support 1-loop BLDC fan output

Modbus communication : Supports Modbus RTU communication ,easy for customer’s programming .

02 Product Overview

The COMFURTER 2HP Inverter Compressor Drive is designed for variable-speed compressor control in compatible HVAC and refrigeration applications.

It provides a control platform for OEM manufacturers developing inverter-driven equipment, with compressor matching, application evaluation and technical support available according to project requirements.

The drive is suitable for integration into selected systems after electrical compatibility and operating conditions have been verified.

03 Key Features & Benefits

  • Precise and stable compressor speed control
  • Smooth startup with adjustable acceleration and deceleration
  • Multiple electrical and compressor motor protection functions
  • Improved part-load energy efficiency
  • Flexible integration with HVAC system controllers
  • Compressor matching and customized firmware support

04 Applications

Inverter Air Conditioners, DX Units, Air-Cooled Chillers, Water Chillers, Heat Pumps, and Commercial HVAC Systems.

05 Technical Specifications

Technical Parameter Specification
Model BAC04A1
Rated Capacity 5000 W
Input Voltage 220 V, 50/60 Hz; Operating Voltage: 170–265 V
Maximum Output Current 12 A
Mechanical Frequency 15–120 Hz (subject to compressor specifications)
Carrier Frequency 5.0–8.0 kHz (adjustable according to compressor noise)
PFC Power Factor: 0.9–0.99
Cooling Method Air Cooling / Refrigerant Cooling
Operating Temperature -35 to 80°C
Communication Interface Modbus RTU with isolated interface; Baud Rates: 2400 / 4800 / 9600 bps
Pollution Degree 2
Dimensions 210.6 × 186.1 × 97.6 mm
Compatible Compressors Compatibility evaluation based on the compressor manufacturer’s technical datasheet

06 Interface Description

07Dimensions & Installation

 

2HP inverter compressor drive dimensional drawing showing 210 mm length, 186 mm width, heatsink dimensions and component height.

08 OEM/ODM & Technical Support

09 Frequently Asked Questions

Q1. How do you evaluate compressor compatibility?

Please provide the compressor model, technical datasheet and application requirements. Our team will evaluate the electrical parameters, operating conditions and drive compatibility before recommending a suitable solution.

Q2. Does the drive support Modbus RTU communication?

The listed drive supports Modbus RTU communication. Available protocol documentation, communication settings and supported parameters can be reviewed during the technical evaluation.

Q3. What protection functions are available?

The drive incorporates electrical and compressor motor protection functions. Specific protection thresholds and functions should be confirmed against the selected hardware and firmware version. System-level protection must be provided by the equipment manufacturer where required.

Q4. Can the firmware be customized?

Selected firmware and parameter adjustments may be available according to compressor compatibility and project requirements. Please share your application details for evaluation.

Q5. How do I choose between air cooling and refrigerant cooling?

The cooling structure should be selected according to the equipment design, installation conditions and thermal management requirements. Our team can help evaluate the suitable option for your application.

Reviews

There are no reviews yet.

Be the first to review “2HP DC Inverter Compressor Drive”

Your email address will not be published. Required fields are marked *

Shopping Cart
Contact Us

Send Your Inquiry Today











    Download all products as a PDF

    Contact OLANSI to Start Your Business

    To save you time, we have also prepared PDF versions of all product catalogs, only leave your email and you will get the download link immediately.